Carpenter Tools

Quality Carpenter Tools Will Help You Create Masterpieces

Posts Tagged ‘way’

PA German Sawbuck Table Reproduction

This is a reproduction of a sawbuck table at the Landis Valley Museum. I tried my best to use only hand tools, but there may have been the occasional slice of a bandsaw blade along the way. The wood is curly cherry, and the finish is shellac and wax. The cool features about this project are sliding, half blind, and through dovetails; tusk tenons; and lamb’s tongue profiles. You can find the links to the construction process here:

Related Reading:

Your Questions About Woodworking Tools

William asks…

Wiring to a work shop?

What size wire do I need for service to a workshop. I will need to go through attic and under ground. Total about 130 ft.. I will need to run a 30 amp Rv traveltrailer and small woodworking tools; table,mitre saw,small a/c, light,etc. Thank you

Denny answers:

For a basic workshop, I usually recommend a 60 amp sub panel. #6 copper or #4 aluminum is usually adequate (if you use TW or UF conductors you would need to increase the wire size by one standard size). While the size would be more than adequate for your current anticipated use, you would have plenty of reserve for possible expansion in the future without worrying about overloading the system.

Mary asks…

i have an 18v delta battery woodworking pack: drill,circular saw,brad nailer,jig saw. I can’t find parts .?

can’t find batteries or a replacement charger for these tools. is there any compatible battery that can be substituted?

Denny answers:

Here’s the Delta/Porter Cable web site:

Mandy asks…

woodworking help…?

I really want to get into woodworking/carving, especially carving cool pieces of wood with a dremmel tool. Space is limited in the garage and stuff. any tips on getting started?

Denny answers:

Take a 2×2 board 8 feet long, draw on it to look like chain links. Remove everything that isn’t part of the chain. Whittle the links apart as you go. When you get done you will have a very unique wooden chain. I have seen them sell for a lot. When you get done post again and I will give you instructions on the next step. Be patient this is very time consuming

Betty asks…

how do i convince my dad to turn his shed into a workshop?

hey, I am a 12 year old boy who loves woodworking and i have heaps of tools, i have been wanting to save up for my own shed but they are too damn expensive… and we already have a shed but it is full of crap that half of it we don’t even need anymore, if he said yes i would clean it for him and stuff, even if i only got half of the shed it would still be enough. how do i convince him, he is a tough cookie to crack too… thanks

Denny answers:

Well, for starters, I know exactly where you’re at. You see, I started my woodworking at 11 years old to now being a master woodworker by trade. In my beginning, I to had a very stubborn father who liked to do things only his way or no way. We had this back room in the house that always seemed to be cluttered with stuff that no one ever used. You know, junk…The problem that I was facing is my father really never knew at the time how much interest and actually how creative I could be with the various woodworking projects that most would suspect a grown-up to have done. Like you, I was convinced that my dad wasn’t going to really cooperate with me by granting me the privilege of transforming this “junk” room, into a useful, learning environment. So this is what I did. I first cleaned the room in its entirety, paying close attention to what was actually garbage & what was not…I simply tossed all the garbage on trash day & as far as the remaining, “junk”, I built some storage cabinets out of some scrap lumber & stored this remaining clutter nice & neatly inside. I was able to attain 75% of the room for a efficient, workshop environment. I was still skeptical on my father’s reaction prior to the unveiling of my efforts. Would you believe that not only was he overwhelmed, in a good way, but he financed the remainder of $ to help build the necessary workbench & remaining storage cabinets to make this shop complete. I’m not saying that this is the solution, but it could be part of the recipe… By what you have already mentioned about your interests in a hobby shop, you’re on the right track…However, your choice of words seems to be a little distasteful for your age. I only mention this because when I was your age, if I were to ever say any kind of four letter word, I would have gotten punished in a physical way, which was severely wrong at the time & I highly disapprove. Please take this advice for what it ‘s worth, because the best thing about it is….It’s Free!!!
Take care & I wish you the very best in your bright future….Oh, & one last thing, No matter what, “Always measure twice & cut once”…You’ll see……………………………………………………………………………………………….

Powered by Yahoo! Answers

Related Reading:

30 gifts to 30 strangers in Sydney

Music: “To Build a Home” by Cinematic Orchestra Hello! My name is Lucas and I’m Brazilian. Since I arrived in Australia a lot of beautiful things happened in my life, so on the day I turned 30 I decided to celebrate in a special way, being grateful to the people of Sydney. :) Thank you so much to all my friends who helped make this happen, without you it would not have been possible. And thank you to everyone who lives in Australia, making this country such a wonderful place. A big hug, Lucas. Website: Twitter If you liked the video, watch the making of! On the making of you will see funny things that happened while I was giving away the presents: a woman that gave me some bread, a little kid stealing one of the presents from a woman and escaping, a group of friends giving me something, people playing with their gifts, an Aussie girl learning Brazilian Portuguese and more. And here you’ll find some pictures we took on the day: The gifts: a Wallabies rugby ball, 30 minute massage voucher, a painting, a skateboard, a scarf, “the doggy bank”, chocolates, bottle of champagne, a teddy bear, a mini tree to hang pictures, a Japanese porcelain tea jar, mini garden tools for kids, scented oil infuser for the home, iTunes music voucher, mini boxer shorts for a new born baby, origami book, “happyland village vet” (toy for a kid), scented soaps and candles, illustrated photo album, a big soft penguin, aromatic moisturizers and
Video Rating: 4 / 5

Related Reading:

Mary Poppins

Join the “practically perfect” Mary Poppins (Julie Andrews) for a “Jolly Holiday” as she magically turns every chore into a game and every day into a whimsical adventure. Along the way, you’ll be enchanted by unforgettable characters such as the multitalented chimney sweep Bert (Dick Van Dyke). You won’t need a “Spoonful Of Sugar” to love every moment of this timeless Disney classic!

Related Reading:

Your Questions About Carpenter Tools

Joseph asks…

Where can a person such as a Carpenter volunteer his services and tools for Haiti?

Pay my way, I’ll bring my own tools, food, living quarters and Generator…gas too if they would let me haul it.

Dusty answers:

Get in touch with the red cross, they can help you.

Linda asks…

how many people know the names of carpenter tools?

Dusty answers:

748,822,186 give or take a few

Sharon asks…

looking for coloring book pictures of carpenters tools?

i am decorating my grandsons bedroom, i am looking for pictures of carpenters tools like hammers, pliers, pencils, nails, whatever,,,,like coloring book pictures that i can enlarge and and color and maybe laminate or something to decorate the upper part of the wall………….any ideas?

Dusty answers:

You may find what you’re looking for on some of these sites:

Good Luck, He’ll love it.

George asks…

poem about jesus and the carpenter’s tools?

I’m trying to trace a poem, in a book published in 1952 that makes connections between Jesus being a carpenter and his ministry.
I’ve tried google – no success

Dusty answers:

Is this it;_ylt=AqgQ721ykPxrc5egsNsV90kgBgx.?qid=20070413102441AAusRlQ

Powered by Yahoo! Answers

Related Reading: