Carpenter Tools

Quality Carpenter Tools Will Help You Create Masterpieces

Posts Tagged ‘benchtop planer’

Using Planer Reviews To Find Your Tool

Woodworking projects are fun and relaxing. Using planer reviews to decide which tool to buy can be very helpful. You want to choose the product that will work for you for a long time so you want to be sure you are buying quality. When you pick one that will work for a variety of things you will put yourself ahead in the long run.

A variety of tasks can be performed with electric planers that sit on a bench. Some models and brands are better than others, but you want to make sure you stay within your budget. If you do not use the tool frequently you can probably select a lower priced model that will work just fine.

These tools are intended to smooth the surface of the wood by removing a thin strip. They cut into the surface and take a uniform sized piece off leaving a smooth place behind. When doing woodworking projects of any kind, these are very helpful.

In addition they can be useful for smoothing out rough patches on the wood. For large projects they will reduce the amount of sanding you will have to do by hand. It is important to keep in mind that these are intended for large areas, so smaller corners will need to be smoothed by hand.

The price range is dramatic on these for various models. It will be a selection that is based on your needs and the budget you have planned for this tool. As mentioned earlier, if you do not use the tool often you can probably get a lower priced model that will suit you fine.

This tool is intended for use on a bench top, not as a hand tool exactly. They are electric powered and will require an electrical outlet close by. With any tools of this nature it is best not to use an extension cord if you can avoid it.

For those looking for a good planer, we would like to point you towards the Bosch planer, which is going to help you complete that job.


Related Reading:

Benchtop Planer Prove Its Worth

A benchtop planer can make your work in wood more efficient and more economical. Boards bought after they have been made smooth through this process cost more to buy. Since this device will do that work for you, you can buy the less costly rough cuts of lumber.

You can go for one of the large size mechanisms that begin at eight hundred dollars and go up. These will be able to use wood twenty inches across though size and price are determined by which kind you buy. You will find most of these being used by professionals who work with wood for a living.

The smaller units make up the bulk of the market. Although termed portable, they are heavy, at least fifty pounds. There cost is two hundred to five hundred dollars although some can be more.

What makes hand planing slow work is the fact that there is only one blade at work so every stroke results in just a single thins shaving. Machines multiply the process by putting two or three knives onto a rotating unit. This cutter head revolves making shallow scallops that will smooth boards into even surfaces.

One problem that must be dealt with is called a snipe. This is the term for the indentation that can occur by the board’s end. It happens because at this point only the one set of roller drives is pulling a board. The lumber lifts, and the cutter now gouges into the wood.

By doing a bit of tinkering in the devices that govern adjustments you will be able to rid your benchtop planer of its habit of sniping. A number to notice in the specification will be the CPI. This stands for cuts per inch. A high number here will equal a board of considerable smoothness.

For those out there that are searching for an excellent planer, we would like to point you towards the Makita planer today.

Related Reading: